Bint Beef

Volume Control Damper    


Model-AVCD

Construction:

  • Frame: High quality Galvanized Steel sheet of thickness 1.2mm as standard.
  • Frame size: 125mm depth and standard flange height of 25mm.
  • Blades: Double skinned high quality extruded Aluminium aerofoil profiles.
  • Drive shaft: Electro-plated square rod of size 12.7mm x 12.7mm.
  • Bushings: Self-lubricating nylon bushings.
  • Blade linkage: Nylon gear. Handle: Galvanized Steel locking hand quadrant.
  • Blade stopper: G.l angle of thickness 0.7mm.

Product Description


Volume Control damper is widely used in heating, ventilation and air-conditioning applications in order to maintain or control the air volume inside the duct. These dampers facilitate the air flow to  each zone and each room to be controlled  during testing & commissioning. The blades may be parallel or opposed type depending on the requirement.

Volume control damper can be mounted either horizontally or vertically. However, care should be taken to mount the damper, by orienting the blades in the direction of the desired airflow. Airmaster provides several types of volume control dampers to choose from.

This model – AVCD is the most commonly used model in majority of the projects

Description:

  • Airmaster Volume Control Dampers are specially designed for use in heating, ventilating and air conditioning systems.
  • Constructed from high quality G.I Sheets
  • Joints are welded and protected by aluminium spray coating to prevent rusting.
  • Blades are coupled by toothed nylon gears which provides opposed blade operation.
  • Hand locking quadrant is provided with clear open/close indication and three intermediate open positions (1/4 – 1/2 – 3/4).
  • Foam gasket is sealed across the blade edges to minimize air leakage between the blades.
  • Flanged edges are supplied un-drilled as standard.
  • Dampers without flanges available as option for duct insertion purpose  – refer Model AVCD-SC.

Optional Accessories:

  • Frame: Thickness up to 2mm on request. Aluminium frame available for light weight
    applications.
  • Handle: Cast Aluminium.
  • Bush: Brass bush, S.S. Ball Bearing.
  • Gear Wheel: Aluminium Alloy.
  • Blade: Low leakage: S.S Jamb seal, Nylon
    blade end caps

Performance Chart

avcd-performance

untitled